C/S Acrovyn® Door Edge Protection Solutions

C/S Acrovyn® Door Edge Protectors

Door Edge Protectors are used to reduce impact damage to door edges and increase the lifespan of the door. They can be easily installed to new or existing doors and can be supplied for fire rated or non fire rated doors.

Door Edge ProtectorFeatures:

  • High impact protection channel made of 2mm thick Acrovyn Sheet, with an 8mm thick toughened and recycled Acrovyn internal lipping and fire seal to match fire rating of the door
  • Supplied with fire and smoke seals tested up to 30min and 60min to BS 476 part 22 and 31.1
  • Available in widths to suit door thicknesses from 44 to 54mm
  • Standard length 2200mm
  • Formed to suit radiused or square edged doors
  • Available in full Acrovyn colour range

 

 

Door Edge Protector Dimensions RequiredProtector Dimensions

Door Edge Protectors are produced to order. The thickness of Acrovyn Sheet should be taken into account when calculating the Door Edge Protector width to ensure that the door continues to fit correctly into the frame.

 

 

 

C/S Acrovyn® Door Edge Protection Channels

Door Edge Channels are used to reduce the effect of continued impact damage to door edges and offer a simple solution to a refurbishment need on non fire rated doors.

ChannelFeatures:

  • Door edge protection channels are made from 2mm or 1.5mm thick Acrovyn Sheet to specific height requirements and must be recess mounted into door edge/s
  • Square or round edge channels can be supplied
  • Available in full Acrovyn colour range

Door Edge Protector Dimensions RequiredChannel Dimensions

Square edge channels are produced to specific sizes using line bending. Finished bend achieved is pencil round on outside bends.The thickness of Acrovyn Sheet should be taken into account when calculating channel sizes.

 

 

Round edge channels are produced using our thermoforming equipment and customer supplied tool.